Phone Commands
These commands will only function if a Bluetooth
®
phone has been paired with the navigation
system, is available in the vehicle, and is on.
Phone enter:
These commands instruct
the system to dial a phone number after it is
stated. State the number including the area code
(ex. 555 123 4567) then state “dial.” You can
state the phone number in partial segments or you
can state the entire phone number. If the number
is stated in partial segments the system will
play back each segment.
Correction:
Deletes the last segment of the
phone number that was spoken.
Delete:
Deletes the entire phone number.
Dial:
Dials the phone number.
Phone dial name:
This command instructs the
system to dial the phone number of a specific
previously stored name. The system responds with
“Name Please”. State the stored name. The
system will then play back the name and will
request a confirmation. Respond with a yes or no.
The system will then dial the number. See
“Phone Book Screen” under “Dialing and Making
Calls Using Your Bluetooth
®
Phone” under
Phone on page 150
for more
information on how to store a nametag.
Phone redial/recall:
These commands instruct
the system to redial a phone number.
Phone help:
This command instructs the system
to assist with phone commands. Help commands
will display on the map screen when the vehicle
is stopped.
The word “telephone” can be substituted in place
of the word “phone”.
OnStar
®
Command
OnStar:
This command instructs the system to
connect to OnStar
®
. You will enter the OnStar
®
voice recognition system. Refer to your OnStar
®
manual for more information.
135
Summary of Contents for STS 2007
