Cadillac STS 2007 Manual Download Page 66

Page: 66 / 162

Emergency

The emergency destination entry method allows
you to enter a destination by choosing from
three categories.

(Emergency):

Touch this screen button to

access the EMERGENCY screen. When in
this screen, the system will display your current
position address and the longitude and latitude
information.

To use the emergency destination entry method,
when no route has been planned, do the following:

1. Select a category.

2. Select a destination point from the list. Touch

the Name Sort screen button to sort the list by
name, or Dist Sort to sort the list by distance
from the vehicle’s current position.

After selecting a destination from the list, a
map screen will appear with the destination
marked.

3. Select the

(destination) symbol screen

button to calculate the route.

4. Select the Guide screen button to start route

guidance.

See “Getting Started on Your Route” later in
this section for more information.

Summary of Contents for STS 2007



































































































































































Search results

Summary of Contents for STS 2007

Reviews:

Related manuals for STS 2007

Brands by name

Popular brands

Cadillac STS 2007, Manual

Search results

Summary of Contents for STS 2007

Reviews:

Related manuals for STS 2007

Brands by name

Popular brands