Cadillac STS 2007, Manual

Page: 60 / 162

To select a POI from a category, do the following:
1. Touch the Category screen button from the
POINT OF INTEREST screen to view a list
of POI categories.
2. Select a category, and then a sub-category.
3. The system will display available POIs names
in the selected sub-category or if the list is too
long the system will display the alpha
keypad.
4. If the alpha keypad is displayed, input the POI
name until a list of available POIs appear.
You may also select the List screen button
when it becomes available.
5. Select the POI from the list.
A map screen will then appear with the
destination marked.
6. Select the
h
(destination) symbol screen
button to calculate the route.
7. Select the Guide screen button to start route
guidance.
See “Getting Started on Your Route” later in
this section for more information.
To select a POI by inputting a city name, do the
following:
1. Select the city screen button, then select; Any
City, 5 near cities, Input City Name, or from
the Last 5 Cities used.
•
Any City — The system will take you back
to the house number first entry method.
Select a city from the list.
•
5 near cities — The system will display the
5 cities nearest your current position.
Select a city from the list.
•
Input City Name — The keypad will display
for inputting the city name. Input the city
name and then select the city from the list.
•
Last 5 Cities — The city names of the last
five cities that were stored as a previous
destination will display. Select a city
from the list.
2. Use the alpha keypad to enter the POI name.
Touch Sym. (symbol) to select symbols and
numbers for the POI, touch Others to
select special characters for the POI, or touch
A - Z to return to the alpha keypad.
60