Cadillac STS 2007, Manual

Page: 94 / 162

To scan preset stations, touch and hold Scan for
two seconds. The radio will go to the next
preset station, play for a few seconds, then go on
to the next preset station. Touch Scan again to
stop scanning.
While in A.B.C mode, the system will change
bands and screens to the current band.
If available on your vehicle, you can also use the
1 - 6 (preset seek) steering wheel control.
Each press of this button will take you to the next
preset station.
Auto Store (Automatic): Select this screen
button to automatically create a preset station list of
the strongest stations available in the local area.
Once this button is selected, the system will start
storing stations in sequential order, starting from
the station currently selected. Select this button
again to return to the original preset stations. This is
not available for XM™ Satellite Radio Stations or
when A.B.C. has been selected on.
Info (Information): See “Radio Data System
(RDS)” later in this section.
Category: See “Radio Data System (RDS)” later
in this section.
Preset Stations
Storing Preset Stations
This feature allows you to store up to 24 preset
stations. You can store six AM, six FM, six WX
(weather), and six XM™, if equipped. To store
presets, do the following:
1. Turn the audio system on or select the BAND
hard key.
2. Select the audio band.
3. Seek, scan, or tune to the desired station.
4. Press and hold one of the six preset screen
buttons for more than two seconds or until
you hear a beep.
5. Press the
e
(audio adjust) hard key to adjust
the tone, Digital Signal Processing (DSP),
fade, and balance. The screen will time
out and the changes will be stored to the
preset station.
6. Repeat the steps for each preset.
94