Cadillac STS 2007 Manual Download Page 133

Page: 133 / 162

DVD Changer Commands

The following commands are only available when
a CD, MP3, or DVD is loaded.

DVD:

These commands instruct the system to

turn the CD/DVD changer on.

DVD turn off:

These commands instruct the

system to turn the CD/DVD changer off.

DVD [set] balance center:

These commands

instruct the system to set the fade and balance to
the center and middle.

DVD scan up:

This command instructs the

system to scan upward through chapters/tracks.

DVD [select] disc (one, two, etc.) track
(one, two, etc.):

These commands instruct the

system to go to a specific disc and chapter/track.

DVD eject [disc] (one, two, three, four, five,
or six):

These commands instruct the system to

eject a specific numbered disc.

DVD help:

This command instructs the system to

assist with DVD changer commands. Help
commands will display on the map screen when
the vehicle is stopped.

The word “middle” can be substituted in place of
the word “center”.

The word “fade” can be substituted in place of the
word “balance”.

The word “chapter” can be substituted in place of
the word “track”.

Climate Control Commands

Heater [set] fan high:

This command will

increase the fan speed by one speed. Repeat the
command until the desired fan speed is achieved.

Heater [set] fan low:

This command will

decrease the fan speed by one speed. Repeat the
command until the desired fan speed is achieved.

Heater defrost:

This command instructs the

system to turn both the front and rear defrost on.

Heater front defrost:

This command instructs

the system to turn the front defrost on.

Heater rear defrost:

This command instructs the

system to turn the rear defrost on.

133

Summary of Contents for STS 2007



































































































































































Search results

Summary of Contents for STS 2007

Reviews:

Related manuals for STS 2007

Brands by name

Popular brands

Cadillac STS 2007, Manual

Search results

Summary of Contents for STS 2007

Reviews:

Related manuals for STS 2007

Brands by name

Popular brands