Cadillac STS 2007 Manual Download Page 150

Page: 150 / 162

Phone

Bluetooth

Phone

The navigation system is equipped with
Bluetooth

. Bluetooth

is a wireless

communication system that allows you to use a
Bluetooth

compatible phone in a hands-free

mode. You may also set up a phone directory for
use in your vehicle. Up to 12 phones may be
registered with your Bluetooth

system, but only

one phone may be connected at a time.

Setting Up Your Bluetooth

Phone

In order to use your cellular phone with this
Bluetooth

system, your phone must be Bluetooth

compatible. See your phone information to find
out if your phone supports Bluetooth

. If your

phone does support Bluetooth

, your phone will

need to be paired to the radio.

To use the navigation system to connect or pair to
the phone:

1. Press the CONFIG hard key.

2. Select the

(Bluetooth

) screen button.

3. Your phone must be in the discoverable mode

and the Bluetooth

feature powered on, to be

found by the Bluetooth system in the
vehicle. This is normally in the phone settings
Bluetooth option.

4. Select the Search screen button. The system

will search for the compatible Bluetooth

devices.

5. Choose your device by touching the icon next

to the device name. Scroll through the
choices using the arrow buttons.

6. Select the Connect screen button. Your phone

and the Bluetooth

system will begin a

connecting procedure.

7. Follow the instructions on the screen of the

phone. They will differ depending on your
phone. Refer to your phone instructions
for further information.

8. Select default so the vehicle will attempt to

automatically connect to the phone when
you enter the vehicle.

150

Summary of Contents for STS 2007



































































































































































Search results

Summary of Contents for STS 2007

Reviews:

Related manuals for STS 2007

Brands by name

Popular brands

Cadillac STS 2007, Manual

Search results

Summary of Contents for STS 2007

Reviews:

Related manuals for STS 2007

Brands by name

Popular brands