Cadel GIOIA, Installation, Use And Maintenance Manual

Page: 80 / 352

80
VENUS - GIOIA
EN
10.15 WEEKLY PROGRAMMING
It allows to enable, disable and settle the weekly hermostat functions (saturday and sunday included).
Press P3 key and then P5 key till the menu “SET CHRONO”. Press once P3 key and with P5 and P6 keys select
“PROGRAM WEEK”. Press once P3 till finding “WEEKLY CHRONO”. With P1 and P2 keys put in “OFF” or “ON”.
It is possible to set four working times delimited by the set times.
After “WEEKLY CHRONO”:
Press P5: the display shows “START PROG-1”, with P1 and P2 keys insert the ignition time value or put in “OFF”.
Press P5: the display shows “STOP PROG-1”, with P1 and P2 insert the switching off value or put in “OFF”.
• Press P5: the display shows “MONDAY PROG-1”, with P1 and P2 keys set “ON” or “OFF”.
• Press P5: the display shows “TUESDAY PROG-1”, with P1 and P2 keys set “ON” or “OFF”.
• Press P5: the display shows “WEDNESD PROG-1”, with P1 and P2 keys set “ON” or “OFF””.
• Press P5: the display shows “THURSDAY PROG-1”, with P1 and P2 keys set “ON” or “OFF”.
• Press P5: the display shows “FRIDAY PROG-1”, with P1 and P2 keys set “ON” or “OFF”.
• Press P5: the display shows “SATURDAY PROG-1”, with P1 and P2 keys set “ON” or “OFF””.
• Press P5: the display shows “SUNDAY PROG-1”, with P1 and P2 keys set “ON” or “OFF”.
Now press P5 and repeat all the previous instructions for Prog-2, Prog-3, Prog-4.
• To exit press three times P4.
10.16 FAN ADJUSTMENT
Press P3 button in menu 1 “FAN ADJUST”: the fan menus no.2 and no.3 will open.
Press P1 to adjust fan no. 2, while P2 button adjusts fan no. 3.
Function “A” activates the default fan data. (For example: heat output 1 activates default rotations at
heat output 1, heat output 2 activates default rotations at heat output 2, etc.).
With function “1” or “2” or “3” or “4” or “5” the fan is forced to work at the selected output. (For example:
by setting “2”, even if the fan is set to heat output 5 it will work as if set to heat output “2”, etc.).
If the stove is set to maximum heat output 5 and the fans to minimum output 1, this may
cause overheating and the “THERMAL SAFETY” alarm to go off.
10.17 FIRE EXTINGUISHING IN CASE OF FIRE
In case it would be necessary to extinguish the fire emitted by the stove or by the chimney flue, use a fire-
extinguisher or contact the firemen. DO NOT use water to extinguish the fire inside the burning pot.
10.18 PELLET SUPPLY
Fig. 34 - Wrong opening of the pellets bag Fig. 35 - Right opening of the pellets bag