Cadel aquos 15, Installation, Use And Maintenance Manual

Page: 62 / 232

62
AQUOS - IDRON
EN
the stove correctly levelled so that the smoke outlet (S) is lined up with the connecting pipe (H). Once the
connection operations are complete, assemble the cladding (ceramics or steel sides).
If the stove needs to be connected to a discharge pipe which goes through the rear wall (to then connect
to the flue), take utmost care not to force the joint.
If the stove smoke outlet is forced or used improperly to lift it or position it, the operation
of the stove can be damaged irreparably.
Fig. 11 - 1. Turn the feet clockwise to lower the stove - 2. Turn the feet counterclockwise to raise the stove
5.2 CERAMIC SIDES INSERTION
Remove, on the upper part, the cast iron top (A).
Take the six ceramic sides (B) from the box and insert them onto the profile (C) in correspondence of the
guide, from the top downwards.
Repeat the same operation for both sides.
Reposition the cast iron top.
Fig. 12 - Sides insertion