Cadel aquos 15, Installation, Use And Maintenance Manual

Page: 61 / 232

61
AQUOS - IDRON
EN
The AQUOS stoves with ceramics come in 2 packs:
• One contains the stove
• One contains the ceramics ( Fig. 9 a pag. 61 ). In this case there will be a single pack for the structure
(the box with the ceramics will be placed on top of the pack with the structure).
Fig. 8 - Example of stove + steel sides packaging Fig. 9 - Example of ceramics packaging
Open the pack, remove the four screws that secure the base of the stove to the pallet, two to the right
and two to the left (see Fig. 10 a pag. 61 ) and position the stove in the selected place, ensuring that it
complies with the above instructions.
Fig. 10 - Removal of packaging screws
The stove body or unit must always be kept in a vertical position when handled and moved by using carts
only. Pay particular attention to the door and its glass, protecting them from mechanical knocks that
would compromise their integrity. Always handle the product with care. If possible, unpack the stove near
the chosen place of installation.
The packaging materials are neither toxic nor harmful, and therefore no particular disposal measures
are required. Therefore, the end user is responsible for product storage, disposal or possible recycling in
compliance with the relative applicable laws.
Do not store the stove unit or its cladding without their packaging.
Position the stove without its cladding and connect it to the flue pipe. Use the four adjustable feet (J) to get