manualshive.com logo in svg

Cabletron Systems SSIM-A2-01, Installation And User Manual, Page: 70 / 88

Share
Download
Cabletron Systems SSIM-A2-01 Installation And User Manual Download Page 70

61

SmartStack SSIM-A2-01/SSIM-A8-01  

Getting in Touch with Technical Support

5. Getting in Touch with Technical Support

For additional support related to this device or document, contact Cabletron 
Systems using one of the following methods:

Before calling Cabletron Systems, have the following information ready:

•

Your Cabletron Systems service contract number 

•

A description of the failure

•

A description of any action(s) already taken to resolve the problem (e.g., 
changing mode switches, rebooting the unit, etc.)

•

The serial and revision numbers of all involved Cabletron Systems products in 
the network

•

A description of your network environment (layout, cable type, etc.)

•

Network load and frame size at the time of trouble (if known)

•

The device history (i.e., have you returned the device before, is this a recurring 
problem, etc.)

•

Any previous Return Material Authorization (RMA) numbers

World Wide Web

http://www.cabletron.com/ 

Phone

(603) 332-9400

Internet mail

[email protected]

FTP

ftp://ftp.cabletron.com/

Login 

anonymous

Password 

your email address

To send comments or suggestions concerning this document, contact the 
Cabletron Systems Technical Writing Department via the following 
email address: [email protected]
Make sure to include the document Part Number in the email message.

Summary of Contents for SSIM-A2-01

























































































Reviews:

No comments