Cabletron Systems SSIM-A2-01, Installation And User Manual

Page: 40 / 88

31
SmartStack SSIM-A2-01/SSIM-A8-01 Console Configuration
Traffic Profile Mapping Configuration
To view and edit traffic profile mappings, select Traffic Profile Mapping from the
ATM LEC Setup screen.
Target ATM Address
Specifies the target ATM address. This address is compared with the destination
address (after it has been ANDed with the address mask) for the VCC to be opened.
ATM Address Mask
Specifies the ATM address mask. The VCC destination address is logically ANDed
with the address mask before being compared with the ATM address parameter of
the traffic profile map.
VCC Type
Specifies the type of VCC to match when opening the VCC. Possible values are
DataDirect, ControlDirect, ControlDistribute, MulticastSend, MulticastForward
and Any (Default).
Profile n
Specifies the traffic profiles to be tried when establishing a new VCC.
Traffic profiles are defined in the traffic profiles table screen. See the section “ATM
Traffic Profile Configuration” on page 38 for information on defining traffic
profiles.