Cabletron Systems SmartSwitch 6500, Reference Manual

Page: 35 / 358

SmartSwitch 6500 Reference Manual 2-11
Console Commands
2 p›F
If you hot-swap a TSM with a TSM of a different type (different I/O ports), routing
information associated with ports on the original TSM is deleted. Before you
insert a replacement TSM, you can display existing routing information using the
show
operator with the
/o
option (for example:
show atmroute /o
).
[Scope] PNNI scope of advertisement (level of
PNNI hierarchy) from the switch to the
address prefix. Integers from 0-104 0
[MetricsTag] Index into listing of traffic parameters
that apply to connectivity from the
switch to the address prefix. If there
are no parameters associated with this
address prefix, then zero is used. 0
[Advertising] Whether or not the local switch should
advertise the address into the PNNI
domain. For example, use Yes for an
end station address and No for an IISP
route. Yes, No No
Output Parameter Description
[Num] Index number of the route as assigned by the console.
[Port] Same as [PortNumber] input parameter.
[ATM Address] Same as [ATMAddr] input parameter.
[Protocol] Routing mechanism used to determine connectivity between the switch and the
reachable address prefix. Possible values are Other, Local, Mgmt, and PNNI.
[Advertising Node Id] Identifier of the node advertising reachability to the address prefix.
[Advertising Port Id] Identifier of the port used from the advertising node to reach the given address prefix.
Input Parameter Description Value/Field Size Default