Cabletron Systems SmartSwitch 6500, Reference Manual

Page: 156 / 358

2-132 SmartSwitch 6500 Reference Manual
Descriptions
Operator Parameters/Permissions Description
delete leserrorlog
[ELANNumber] <elannumber>
Administrator
Clears the LES error log.
show leserrorlog
Administrator Displays the LES error log.
Table 2-6 LESErrorLog Error Codes
Code Name Meaning
0 Success Successful Response
1 Version not supported VERSION field of request contains a value higher than that
supported.
2 Invalid request parameters The parameters given are incompatible with the ELAN.
4 Duplicate LAN destination
registration SOURCE-LAN-DESTINATION duplicates a
previously-registered LAN destination.
5 Duplicate ATM address SOURCE-LAN-DESTINATION duplicates a
previously-registered ATM address.
6 Insufficient resources to grant request Responder is unable to grant request for reasons such as
insufficient table space or ability to establish VCCs.
7 Access denied Request denied for security reasons.
8 Invalid REQUESTOR-ID LECID field is not zero (Configure or Join) or is not LE
Client’s LECID (others).
9 Invalid LAN destination LAN destination is a multicast address; or, LAN destination
is a route descriptor on an Ethernet/802.3 ELAN.
10 Invalid ATM address Source or target ATM address is not in a recognizable
format or is not valid.
20 No configuration LE client is not recognized.
21 LE_CONFIGURE Error Parameters supplied give conflicting answers. May also be
used to refuse service without giving a specific reason.
22 Insufficient information LE client has not provided sufficient information to allow
the LECS to assign it to a specific ELAN.
24 TLV not found There are no TLVs present in the set of TLVs for this
emulated LAN that can be returned with the
Config-Frag-Info TLV passed in the
LE_CONFIGURE_REQUEST message.