Cabletron Systems SmartSwitch 6500, Reference Manual

Page: 17 / 358

SmartSwitch 6500 Reference Manual 1-7
Introduction
Descriptions
A “Descriptions” section follows parameters. The descriptions section shows command syntax (operator, attribute, and
input parameters). It also gives additional information on what the command does and how to use it. Finally, the
descriptions section indicates the privilege level required to use the command (Read Only, Administrator, or All).
Administrator privilege level is necessary for actions other than viewing output displays. All means any user has
complete access to command features..
Examples
Examples are copied exactly from the switch console. They show how you must enter console commands at the switch
prompt (for example:
modify buselan
). The other bold text (
1
,
103
,
pvc
,
802.5
,
4544
) is input parameter values. Text
in brackets immediately following each parameter field indicates the current default (for example:
ELANType(802.3)
).
switch_prompt # modify buselan (console command)
ELANNumber(0) :103 (input entry)
ELANName(ELAN102) :elan103 (input entry)
ConnectMethod(SVC) :pvc (input entry)
ELANType(802.3) :802.5 (input entry)
Multipoint(YES) : (accept default)
MTU(1516) :4544 (input entry)
switch_prompt #
switch_prompt # show buselan
ELANNumber : 103
ELAN : elan103
ELAN Number : 103
ELAN Name : elan103
ATM Address : 39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:15:66:02
Max Frame Size : 4544
Connection Method : PVC
Distribute VPI/VCI: 0/50
LAN Type : 802.5
Multipoint : YES
Operator Parameters/Permissions Description
show
clientvc
[ClientNumber] <clientnumber>
All
Displays client ARP mapping details. In addition, it displays
VC details for local IP/ATM or LANE clients. For IP/ATM,
the associated IP address appears; for LANE, the associated
MAC address appears. (The associated address is what is
located at the other end of the VC.)