Cabletron Systems SmartSwitch 6500, Reference Manual

Page: 129 / 358

SmartSwitch 6500 Reference Manual 2-105
LECSErrorLogControl
Use LECSErrorLogControl to control the LECS error log. The LECS error log contains information on LECS
configuration request failures.
Operators
modify, show
Parameters
Descriptions
Input Parameter Description Value/Field Size Default
[ErrorLogStatus] Enables or disables the LECS error log Enable, Disable No default
Output Parameter Description
[Administrative Status] Administrative status of the LECS error log. Possible values are enabled or disabled.
(Same as the [ErrorLogStatus] input parameter.)
[Operation Status] Operational status of the LECS error log. Possible values are enabled or disabled.
[Log Last Entry Index] Index of last entry in the log. The log can contain up to 128 entries. The entries are
written in top-down order (starting with index 128, then 127, 126, 125, and so forth).
After 128 entries, no additional entries are logged until all current entries are deleted. Use
the
delete lecserrorlog
command to delete all entries.
Operator Parameters/Permissions Description
modify lecserrorlogcontrol
[ErrorLogStatus]
<errorlogstatus>
Administrator
Enables or disables the LECS error log.
show lecserrorlogcontrol
All Displays LECS error log control information.