Cabletron Systems SmartSwitch 6500, Reference Manual

Page: 215 / 358

SmartSwitch 6500 Reference Manual 2-191
PnniStats
Use PnniStats to display PNNI statistics for the switch.
Operators
show
Parameters
This parameter has no input parameters. Just enter
show pnnistats
at the switch prompt.
Output Parameter Description
[Highest Version] The highest version of PNNI protocol that the switch supports.
[Lowest Version] The lowest version of PNNI protocol that the switch supports.
[DTL Count Originator] Number of DTL stacks that the switch has originated as the DTLOriginator
and placed into signalling messages. This includes the initial DTL stacks
computed by the switch. It also includes any alternate route (second choice,
third choice, etc.) DTL stacks computed by the switch in response to
crankbacks.
[Crankback Count Originator] Number of connection setup messages including DTL stacks originated by the
switch that have cranked back to the at all levels of the hierarchy.
[Alternate Route Count Originator] Number of alternate DTL stacks that the switch has computed and placed into
signalling messages as the DTLOriginator.
[Route Fail Count Originator] Number of times the switching system failed to compute a viable DTL stack
as the DTLOriginator for some call. It indicates the number of times a call was
cleared from this switching system due to originator routing failure.
[Route Fail Unreachable Originator] Number of times the switching system failed to compute a viable DTL stack
as the DTLOriginator because the destination was unreachable; that is, those
calls that are cleared with the following in the cause information element (IE):
Specified Transit Network Unreachable, or Destination Unreachable.