Cabletron Systems SmartSwitch 6500, Reference Manual

Page: 43 / 358

SmartSwitch 6500 Reference Manual 2-19
Console Commands
Descriptions
Output Parameter Description
[ELAN Number] Number of the ELAN to which the BUS belongs.
[ELAN Name] Name of the ELAN to which the BUS belongs.
[ATM Address] ATM address of the ELAN.
[Max Frame Size] Maximum transfer unit assigned for this client. (Same as the [MTU] input parameter.)
[Connection Method] Type of connection used. (Same as the [ConnectMethod] input parameter.)
[Distribute VPI/VCI] VPI/VCI values of control direct VCC or multicast send VCC.
[ELAN Type] Data-link type used by the ELAN.
[Multipoint] Indicates whether control distribute VCC is PMP (point-to-multipoint) or PTP
(point-to-point).
[Error Logging] Whether or not BUS error log is enabled.
[Min TD Negotiation] Whether or not minimum TD negotiation is enabled.
Operator Parameters/Permissions Description
add buselan
[ELANNumber] <elannumber>
[ELANName] <elanname>
[ConnectMethod] <connectmethod>
[ELANType] <elantype
[Multipoint] <distributevcctpe>
[MTU] <maximumframesize>
[ErrorLogEnable] <errorlogenable>
[MinimumTDEnable] <minimumtdenable>
[ForwardPeakCellRate]
<forwardpeakcellrate>
Administrator
Creates a BUS on a specified ELAN. If the
corresponding LESELAN exists, then the added
BUSELAN should have similar characteristics.
delete
buselan
[ELANNumber] <elannumber>
Administrator
Removes the BUS from a specified ELAN and
drops clients connected to it.