Cabletron Systems SmartSwitch 6500, Reference Manual

Page: 261 / 358

SmartSwitch 6500 Reference Manual 2-237
In the Output Parameter table below, (
</d>
) indicates parameters that are available only through the
show pvp /d
(detailed) command.
[Port1-to-Port2Traffic
DescriptorIndex] Index of the traffic descriptor for the direction of
flow from Port 1 to Port 2. Create this traffic
descriptor before creating the PVC. Positive integer No default
[Port2-to-Port1Traffic
DescriptorIndex] Index of the traffic descriptor for the direction of
flow from Port 2 to Port 1. Create this traffic
descriptor before creating the PVC. Positive integer No default
[LowPortNumber] Number of the Low Port (based on lexical order). 1A1 to 8B4 No default
[Low VPI] VPI of the Low Port. Positive integer No default
[HighPortNumber] Number of the High Port (based on lexical order). 1A1 to 8B4 No default
[HighVPI] VPI of the High Port. Positive integer No default
[PortNumber] Physical port number on the switch. 1A1 to 8B4 No default
[CrossConnectId] Cross-connect ID of the PVP (as assigned by switch
software). Use the
show pvc all
command to get a
list of cross-connect IDs. Each PTP PVP has a
unique cross-connect ID.
Positive integer No default
[CrossConnectSubId] Cross-connect sub-ID of the PVP (as assigned by
switch software). Positive integer No default
Output Parameter Description
[Conn Id] Cross-connect ID of the PVP (as assigned by switch software).
Each PTP PVP has a unique cross-connect ID. PMP PVPs might
have the same cross-connect ID but different cross-connect sub
IDs.
[Conn SubId] Cross-connect sub-ID of the PVP. Each PTP PVP and PMP PVP
has a unique cross-connect sub-ID.
[Low Port] Number of the Low Port (based on lexical order).
[Low VPI] VPI of the Low Port.
Input Parameter Description Value/Field Size Default