Cabletron Systems SmartSwitch 6500, Reference Manual

Page: 68 / 358

2-44 SmartSwitch 6500 Reference Manual
Console Commands
ClientStat
Use ClientStat to display packet count statistics of LANE or IP/ATM clients on the switch.
2 p›F
Clients on the switch are called local clients.
Operators
show
Parameters
In the Output Parameter table below,
(
</d>
)
appears next to parameters that are available only through the
show
clientstat /d
(detailed) command. The (IP/ATM) and (LANE) client indicators after particular parameters indicate
that these parameters display only if that particular client type is active.
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the local client. 0-127 or All All
Output Parameter Description
[Client] Number of the client. (Same as the [ClientNumber] input parameter.)
[Type] Type of client.
[RxPkts] Number of packets received.
[TxPkts] Number of packets transmitted.
[RxOctets] Number of octets (bytes) received.
[TxOctets] Number of octets (bytes) transmitted.
[Bytes Received]
</d>
Number of bytes received.
[Unicast Packets]
</d>
Number of unicast packets received or transmitted.