Cabletron Systems SmartSwitch 6500, Reference Manual

Page: 42 / 358

2-18 SmartSwitch 6500 Reference Manual
Console Commands
BUSELAN
Use BUSELAN to manage characteristics of a BUS for a specified ELAN. If an LES corresponding to the BUS exists,
the characteristics of the BUS should match those of the LES.
Operators
add, delete, modify, show
Parameters
Input Parameter Description Value/Field Size Default
[ELANNumber] Number of the ELAN to which the BUS
belongs. 0-125 or All All
[ELANName] Name of the ELAN to which the BUS belongs. Up to 32 characters
[ConnectMethod] Type of connection used. PVC, SVC SVC
[ELANType] Data-link type used by the ELAN. 802.3 (Ethernet),
802.5 (TokenRing) 802.3
[Multipoint] Indicates whether control distribute VCC is
PMP (point-to-multipoint) or PTP
(point-to-point). Yes: VCC is PMP
No: VCC is PTP Yes
[MTU] Maximum transfer unit assigned for this client. 1516, 1580, 4544, or
9234 1516
[ErrorLogEnable] Whether or not BUS error log is enabled. Yes, No No
[MinimumTDEnable] Whether or not minimum acceptable traffic
descriptor negotiation is enabled. Yes, No No
[ForwardPeakCellRate] Minimum forward peak cell rate. Positive integer