EPIM SPECIFICATIONS
Page A-8
A.2.2
EPIM-F1 and EPIM-F2 (Multimode Fiber Optic Ports)
Internal Transceiver:
Cabletron Systems FOT-F™ Fiber Optic
Transceiver
Type:
EPIM-F1:
SMA fiber optic ports
EPIM-F2:
ST fiber optic ports
Figure A-2. EPIM-F1 and EPIM-F2
Note: The above transmitter power and receive sensitivity levels
represent Peak Power Levels after optical overshoot. You must use a
Peak Power Meter to correctly compare the above values to those you
measure on any particular port. If you measure Power Levels with an
Average Power Meter, you must subtract 3 dBm from the measurement
to correctly compare measured values to the above values
(e.g., -29.5 dBm peak = -32.5 dBm average).
Parameter
Typical
Receive Sensitivity:
-29.5 dBm
Max Receive Power:
-8.2 dBm
Transmitter Power Into –
50/125
µ
m fiber:
-13.0 dBm
62.5/125
µ
m fiber:
-10.0 dBm
100/140
µ
m fiber:
-7.0 dBm
Bit Error Rate:
Better than 10
-10
