LOCAL MANAGEMENT
Page 5-6
To make changes to the Community Name Table Screen:
1.
Using the arrow keys, highlight the Community Name field
adjacent to the desired access level.
2.
Enter the password, up to 32 characters in length, into the field.
3.
Press the Return key.
4.
Repeat steps 1 - 3 for editing any of the other community names.
5.
Using the arrow keys, highlight SAVE at the bottom of the screen
and press the Return key (or press F6). The message “SAVED
OK”, appears. The ETWMIM saves the community names to
memory and implements their modes of access.
Please note that the first time you try to exit the screen without
saving your changes, Local Management displays a “NOT
SAVED?” message above the SAVE command. If you proceed to
exit without saving, you lose all edits.
6.
Exit the screen by either pressing the appropriate Function key
or by using the arrow keys to highlight RETURN and pressing the
Return key. The latter exits you to the Feature Selection screen.
5.4
CONFIGURING THE ETWMIM
The ETWMIM Configuration screen allows you to assign IP Addresses
and Subnet Masks. The Configuration screen also allows you to set the
Default Gateway.
