LOCAL MANAGEMENT
Page 5-7
5.4.1
Accessing the Configuration Screen
To access the Configuration screen from the Features Selection screen:
•
Use the arrow keys to highlight the IP Address Assignment
option and press the Return key, or press F7. The
Configuration screen, Figure 5-4, appears.
Figure 5-4. Configuration Screen
5.4.2
Configuration Screen Fields
The following briefly explains each field on the Configuration screen.
I/F
Gives the number of the interface corresponding to the channel over
which packets with that IP address are passing. There is an ENET
(Ethernet) and a TR (Token Ring) channel.
IP Address
Displays the IP Address of the Ethernet and Token ring ports.
SubNET Mask
Displays the SubNET Mask for the ETWMIM. A subnet mask is a
32-bit quantity which “masks out” the network bits of the IP address.
This is done by setting the bits in the mask to 1 when the network
treats the corresponding bits in the IP address as part of the network
or subnetwork address, or 0 if the bit identifies the host.
ETWMIM LOCAL MANAGEMENT
Cabletron ETWMIM Revision 00.00.00
CONFIGURATION
I/F
ENET
TR
Default Gateway: 0.0.0.0
COM-1 Application: OFFLINE
COM-2 Application: CONSOLE Baud Rate: 9600 --ACTIVE--
F6
F7
F9
F10
SAVE IP COMMUNITY NAMES TRAP TABLE SNMP TOOLS CLI
MAC Address
00-00-1d-06-f8-d8
00-00-b8-60-1f-9b
SubNET Mask
0.0.0.0
0.0.0.0
IP Address
0.0.0.0
0.0.0.0
F8
