Page C-1
APPENDIX C
FCC PART 68 - USER’S INFORMATION
The following instructions are to ensure compliance with the Federal
Communications Commission (FCC) Rules, Part 68.
1.
All direct connections to T1 lines must be made using standard
plugs and jacks.
2.
Before connecting your unit, you must inform the local telephone
company of the following information:
3.
If the unit appears to be malfunctioning, it should be disconnected
from the telephone lines until you learn if your equipment or the
telephone line is the source of the trouble. If your equipment needs
repair, it should not be reconnected until it is repaired.
4.
The CSU/DSU has been designed to prevent harm to the T1
network. If the telephone company finds that the equipment is
exceeding tolerable parameters, the telephone company can
temporarily disconnect service, although they will attempt to give
advance notice if possible.
5.
Under the FCC Rules, no customer is authorized to repair this
equipment. This restriction applies regardless of whether the
equipment is in or out of warranty.
6.
If the telephone company alters their equipment in a manner that
will affect use of this device, they must give you advance warning
so as to give you the opportunity for uninterrupted service. You will
be advised of your right to file a complaint with the FCC.
7.
The attached affidavit must be completed by the installer.
Port ID
REN/SOC
FIC
USOC
RJ48C
