Port Redirect Function Screen
DLEHF-MA User’s Guide
5-31
5.11.2
Changing Source and Destination Ports
Add or delete source/destination module and port entries as follows:
1.
Use the arrow keys to highlight the Source Module field.
2.
Press the SPACE bar or BACKSPACE one or more times to increment
or decrement the module number displayed in the brackets [n] until the
appropriate module number is displayed.
3.
Use the arrow keys to highlight the Source Port field.
4.
Press the SPACE bar or BACKSPACE one or more times to increment
or decrement the port number displayed in the brackets [n] until the
appropriate port number is displayed.
5.
Use the arrow keys to highlight the Destination Module field.
6.
Use the SPACE bar or BACKSPACE to step to the appropriate module
number for the destination module.
7.
Use the arrow keys to highlight the Destination Port field.
8.
Use the SPACE bar or BACKSPACE to step to the appropriate port
number for the destination port.
9.
Use the arrow keys to highlight the Status field.
10. Use the SPACE bar to toggle between the ADD and DEL (delete)
settings. Press ENTER. This adds or deletes the port selections made
in steps 2 and 4 and also updates the screen Source Port and
Destination Port list.
11. Use the arrow keys to highlight the Errors field.
12. Use the SPACE bar to toggle between the ON and OFF settings. Press
ENTER. ON forces the source module(s) and port(s) to forward
errored frames and valid traffic to the destination module(s) and
port(s). OFF suppresses errored frames from being sent to the
destination modules and ports while allowing valid traffic to pass.
13. Use the arrow keys to highlight SAVE at the bottom of the screen.
Press ENTER. The message “SAVED OK” is displayed.
If more than one module and port is to be redirected, repeat
steps 1 through 10 for each additional setting, then go to
step 13 to save all the new settings at once.
