SNMP Traps Screen
DLEHF-MA User’s Guide
5-57
5.17
SNMP TRAPS SCREEN
Since the DLEHF-MA is an SNMP compliant device, it can send
messages to multiple network management stations to alert users of status
changes. The SNMP Traps screen is shown in Figure 5-21.
To access the SNMP Traps screen from the Module Configuration Menu
screen, use the arrow keys to highlight the SNMP TRAPS menu item and
press ENTER. The SNMP Traps screen displays.
Figure 5-21
SNMP Traps Screen
The following explains each field of the SNMP Traps screen:
Trap Destination (Modifiable)
Indicates the IP address of the workstation to receive trap alarms. Up to
eight different destinations can be defined.
It is only necessary to assign SNMP traps if the user desires
the traps to be sent to different addresses than those assigned
in Section 5.9 which details how to set SNMP traps for the
DLM6C-AA chassis.
MS 700 LOCAL MANAGEMENT
Firmware Revision: XX.XX.XX
SNMP Traps
236228
BOOTPROM Revision: XX.XX.XX
Trap Community Name
public
public
public
public
public
public
public
public
Module Type: DLEHF-MA
Slot Number:
X
Event Message Line
RETURN
SAVE
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
EXIT
