Network Tools
DLEHF-MA User’s Guide
5-101
The commands are presented in the following format:
command:
Syntax:
Shows the required command format. It
indicates where arguments, if any, must be
specified
Description:
Briefly describes the command and its uses.
Options:
Lists any additional fields in the appropriate
format which may be added to the command.
Example:
Shows an example of the command.
5.31.1
Built-in Commands
The built-in commands listed in this section activate functions on the
managed device or devices being accessed through Network Tools.
The conventions used in describing the commands in Network
Tools are as follows:
Arguments enclosed by [ ] are required.
Arguments enclosed by < > are optional.
Information entered by user is in shown in this Helvetica font
.
To abort the output or interrupt a process, press the CONTROL
key and c key simultaneously, designated as ^C here.
