Configuration with QuickSET
12
QuickSET Configuration Guide
Link Management Protocol —
If you selected Frame Relay protocol, this field displays
Q.933 Annex A, or T1.617 Annex D. The default is T1.617 Annex D. This field is grayed out and
not used for PPP.
When you have completed configuration, click on the Next>> button and go to the
Wide Area
Frame Relay Time Slot Configuration Window
or
Wide Area PPP Time Slot Configuration
Window
section, depending on which protocol you are using.
Wide Area DI Configuration Window
The Wide Area (DI) configuration window is shown in
Figure 10
below.
The following section explains how to configure the Wide Area DI interface using QuickSET.
Figure 10 Wide Area DI Configuration Window
The line configuration information given below and on the following pages must be supplied by
your service provider. The factory default settings are in bold.
The WPIM-DI has two connectors allowing two devices to share the available Time Slots in a T1
WAN link; an NI (Network Interface) Port, and a DI (Drop and Insert) Port.
Summary of Contents for CSX200 CyberSWITCH
Page 2: ......
Page 164: ...Configuration with QuickSET 148 QuickSET Configuration Guide...
