Configuration with QuickSET
122
QuickSET Configuration Guide
Default Route... —
Displays the Default Route window. You can select one interface to be a
default route. A default route forwards all packets that are not defined in the routing table to the
interface defined in the Default Route window (Unnumbered Routing Only).
To set up a default route in “Numbered Mode” communication, click the Default Route button.
The IP Subnet 000.000.000.000, and Subnet Mask 255.255.255.255 will automatically be entered.
Then use the NEXT HOP data field to enter the IP Address of the router you wish to designate as
the default route.
Add Route... —
This button allows you to add a route and to configure the device to forward only
those packets from the specified route.
Delete —
This button deletes the route highlighted in the IP Routing Configuration window.
Advanced —
This button displays the Advanced Options window shown in
Figure 133
below.
See the section, “Advanced Routing Options” for information on how to use the features of this
window.
Figure 133 Advanced Options Window
Advanced Options Window
The Advanced IP Routing Settings window is used to set up Numbered Mode communication. A
table of advanced IP Routing settings is visible in the window. Select a setting by clicking
anywhere in the window, then click the Modify button to change the settings.
Summary of Contents for CSX200 CyberSWITCH
Page 2: ......
Page 164: ...Configuration with QuickSET 148 QuickSET Configuration Guide...
