Configuration with QuickSET
2
QuickSET Configuration Guide
If your system is connected to more than one network, you will see the Local User Networks
window shown below in
Figure 2
. Use the scroll button to select the network connection that your
QuickSET-configurable device is attached to. Click
OK
to select the network that your device is
on.
Figure 2 Local User Networks Window
Normally,
QuickSET
automatically establishes a communication link with the device that you wish
to configure. However, under certain circumstances,
QuickSET
may not be able to locate the
device automatically. In this case, the IP Address window shown in
Figure 3
displays.
Figure 3 IP Address Window
Summary of Contents for CSX200 CyberSWITCH
Page 2: ......
Page 164: ...Configuration with QuickSET 148 QuickSET Configuration Guide...
