Cabletron Systems CSX200 CyberSWITCH, Configuration Manual

Page: 128 / 164

Configuration with QuickSET
112 QuickSET Configuration Guide
MAC Bridging — This field allows you to specify whether the device bridges traffic. Click on the
check box to turn MAC Bridging on.
Figure 123 HSIM-W84 Bridging and Routing Window
Spanning Tree Protocol — This field is grayed out until MAC Bridging is turned on. It allows
you to configure the device to use the Spanning Tree Protocol, which lets the remote device check
for bridging loops, and other sites that use the Spanning Tree Protocol. Click on the check box to
turn on Spanning Tree Protocol.
IP Routing — The IP Routing check box allows you to turn on/off IP Routing. Click on the check
box to turn on IP Routing.
IPX Routing —
The IPX Routing check box allows you to turn on/off IPX Routing. Click on the
check box to turn IPX Routing on.
External Ethernet 1 Network # — This field displays the IPX network number assigned to the
external Ethernet network on Ethernet port 1. It is grayed out until IPX Routing is turned on.
External Ethernet 2 Network # —
This field displays the IPX network number assigned to the
external Ethernet network on Ethernet port 2. It is grayed out until IPX Routing is turned on. Note:
HSIMs will display HSIM External Network Number.
Frame Type — This field is grayed out until IPX Routing is turned on. It allows you to select the
type of IPX frame in which packets are encapsulated for transmission. Select one of the four
available frame types; Ethernet_II, Ethernet_Snap, Ethernet_802.2, or Ethernet_802.3.