Cabletron Systems CSX200 CyberSWITCH, Configuration Manual

Page: 154 / 164

Configuration with QuickSET
138 QuickSET Configuration Guide
IPX Routing Configuration Window
This section describes the fields in the IPX Routing Configuration window.
Interface # — Displays all interface numbers that can be assigned an IPX network number.
Alias — This is a name that you assign to the active interface, for convenience.
Network # — Displays the active IPX network number assigned to an interface.
Host Map... — The IPX Host Map button takes you to the IPX Host Map window. IPX Host Map
entries are used for IPX routing in Frame Relay mode only.
Modify... — Use this button to change an entry in the IPX Routing Configuration window. Select
the interface number to modify by clicking on the tab to the left of the interface number.
IPX Host Map Window
The IPX Host Map window shown in Figure 150 displays after clicking on the Host Map... button
in the (IP/IPX) Routing configuration window. Host Map entries are used for IPX routing using
Frame Relay Protocol only. The IPX Host Map is a database of remote IPX hosts, defined
(generally) by the WAN Network number and MAC Address, and (more specifically) by the
Interface Number and Data Link Connection Identifier (DLCI). The DLCI and Interface Number
define the switched connection to the Telco central office. Enter the remote WAN MAC address
and the remote Router’s WAN Network number.
Figure 150 IPX Host Map Window