Chapter 3: Installation
3-2
6H123-50 and 6H133-37 User’s Guide
3.3
OPTIONS
If the 6H123-50 will be installed with an optional Fast Ethernet Interface
Module, refer to
Appendix C
for installation instructions. The installation
instructions for the HSIMs available for the 6H133-37 are located in the
associated user’s guide.
3.4
INSTALLING THE 6H123-50 AND 6H133-37 INTO
THE 6C105 CHASSIS
The 6H123-50 and 6H133-37 can be installed in any of the 5 slots that are
available in the 6C105. To install a module, proceed as follows:
1.
Remove the blank panel covering the slot in which the module is to be
installed. All other slots must remain covered to ensure proper airflow
and cooling. (Save the blank plate in the event you need to remove the
module.)
2.
Carefully remove the module from the shipping box. (Save the box
and packing materials in the event the module must be reshipped.)
3.
Locate the antistatic wrist strap shipped with the 6C105 chassis.
Attach the wrist strap to your wrist and plug the cable from the
antistatic wrist strap into the ESD grounding receptacle at the upper
right corner of the 6C105.
NOTE
Install any optional equipment before proceeding to
Section 3.4
.
!
CAUTION
Failure to observe static safety precautions could cause
damage to the 6H123-50 and 6H133-37. Follow static safety
handling rules and properly wear the antistatic wrist strap
provided with the 6C105 chassis.
!
CAUTION
Do not cut the non-conductive bag to remove the module.
Damage could result from sharp objects contacting the board
or components.
Summary of Contents for 6H133-37
