Chassis Configuration Screen
6H123-50 and 6H133-37 User’s Guide
5-23
5.7.3
Setting the Chassis Date
To set the chassis date, perform the following steps:
1.
Use the arrow keys to highlight the Chassis Date field.
2.
Enter the date in this format: MM/DD/YYYY
3.
Press ENTER to set the system calendar to the date in the input field.
4.
Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press ENTER.
If the date entered is a valid format, the Event Message Line at the top of
the screen displays “SAVED OK”. If the entry is not valid, Local
Management does not alter the current value, but it does refresh the
Chassis Date field with the previous value.
NOTE
The 6C105 is year 2000 compliant, so the Chassis Date may be
set beyond the year 1999.
NOTE
It is not necessary to add separators between month, day, and
year numbers. For example, to set the date to 03/17/1997, type
“03171997” in the Chassis Date field.
NOTE
Upon saving the new chassis date, all interface modules
installed in the chassis recognize the new value as the current
date.
Summary of Contents for 6H133-37
