Chapter 5: Local Management
5-104
6H123-50 and 6H133-37 User’s Guide
11.
To change the security on more than one connector, repeat steps 1
through 9 for each connector. Then proceed to step 12 to save all
settings at once.
12.
Use the arrow keys to highlight the SAVE command.
13.
Press ENTER. The message “SAVED OK” displays and all ports of
the connector are set to the selected operating mode.
5.30
MODULE STATISTICS MENU SCREEN
The Module Statistics Menu screen,
Figure 5-36
, provides access to
screens that enable the user to obtain statistics about traffic through each
switch interface and repeater port.
Access the Module Statistics Menu screen from the Module Menu screen
by using the arrow keys to highlight the MODULE STATISTICS menu
item and pressing ENTER. The Module Statistics Menu
screen displays.
NOTE
The following menu item on the Module Statistics Menu screen
will not display if the operational mode of the module has been
set to SECURE FAST VLAN:
SWITCH STATISTICS
Section 5.15.9
provides instructions on setting the operational
mode.
Summary of Contents for 6H133-37
