Cabletron Systems 6H133-37, User Manual, Page: 170 / 204

Chapter 5: Local Management
5-120 6H123-50 and 6H133-37 User’s Guide
Admin Status (Read-only)
Indicates if the network or port is enabled (Enabled) or disabled
(Disabled).
NETWORK # (Command)
This command is used to select a particular Network to view its statistics.
When the Network is selected the statistics are also displayed for the first
port in the Network under Port #. For details, refer to
Section 5.34.1 .
PORT # (Command)
This command is used to select a port to view its statistics and those of its
associated Network. For details, refer to
Section 5.34.2 .
CLEAR COUNTERS (Command)
This command sets all statistics counters to zero. For details on how to
use this command, refer to
Section 5.34.3 .
5.34.1 Displaying Network Statistics
To display the statistics of any Network, proceed as follows:
1. Use the arrow keys to highlight the NETWORK # command field at
the bottom of the screen.
2. Press the SPACE bar to increment or press the BACKSPACE key to
decrement the port number.
3. Press ENTER (the NETWORK #, the first PORT # of the Network,
and the associated statistics do not display until ENTER is pressed).
5.34.2 Displaying Repeater Statistics
To display the statistics for any port, proceed as follows:
1. Use the arrow keys to highlight the PORT # command field at the
bottom of the screen.
2. Press the SPACE bar to increment or press the BACKSPACE key to
decrement the port number.
3. Press ENTER (the PORT #, the NETWORK #, and the statistics do not
change until ENTER is pressed).