Cabletron Systems 6H133-37, User Manual, Page: 91 / 204

Module Configuration Menu Screen
6H123-50 and 6H133-37 User’s Guide 5-41
The following briefly defines each screen accessible from the Module
Configuration Menu screen:
GENERAL CONFIGURATION
The General Configuration screen enables the user to monitor and
configure operating parameters for the 6H123-50 and 6H133-37. For
details, refer to
Section 5.15 .
SNMP COMMUNITY NAMES
The SNMP Community Names screen enables the user to enter new,
change, or review the community names used as access passwords for
Local/Remote management operation. Access is limited based on the
password level of the user. For details, refer to
Section 5.16 .
SNMP TRAPS
The SNMP Traps screen provides display and configuration access to the
table of IP addresses used for trap destinations and associated community
names. For details, refer to
Section 5.17 .
SWITCH CONFIGURATION
The Switch Configuration screen provides basic setup options for making
a switch operational in the network. For details, refer to
Section 5.18 .
SMARTTRUNK CONFIGURATION
The SmartTrunk Configuration screen allows the user to logically group
interfaces to aggregate high speed uplinks. For details, refer to
SmartTrunk User’s Guide.
MODULE SPECIFIC CONFIGURATION
The Module Specific Configuration Menu screen enables the user to
configure ports or check system resources specific to the 6H123-50 and
6H133-37. For details, refer to
Section 5.19 .