
SNMP Traps Screen
6H123-50 and 6H133-37 User’s Guide
5-29
5.9
SNMP TRAPS SCREEN
Since the 6C105 is an SNMP compliant device, it can send messages to
multiple Network Management Stations to alert users of status changes.
This is set up using the SNMP Traps screen. The SNMP Traps screen is
shown in
Figure 5-12
.
Access the SNMP Traps screen from the Chassis Configuration screen by
using the arrow keys to highlight the SNMP TRAPS menu item and
pressing ENTER. The SNMP Traps screen displays.
Figure 5-12
SNMP Traps Screen
The following defines each field of the SNMP Traps screen.
Trap Destination (Modifiable)
Indicates the IP address of the workstation to receive trap alarms. Up to
eight different destinations can be defined.
Trap Community Name
(Modifiable)
Displays the Community Name included in the trap message sent to the
Network Management Station with the associated IP address.
SNMP Traps
1960_17
Trap Community Name
public
public
public
public
public
public
public
public
6C105 LOCAL MANAGEMENT
Event Message Line
RETURN
SAVE
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
EXIT
Summary of Contents for 6H133-37
