Cabletron Systems 6H133-37, User Manual, Page: 165 / 204

RMON Statistics Screen
6H123-50 and 6H133-37 User’s Guide 5-115
Fragments (Read-only)
This field displays the number of received frames that are not the
minimum number of bytes in length or received frames that had a bad
Frame Check Sequence (FCS), were less than 64 bytes in length
(excluding framing bits, but including FCS bytes), and having an invalid
FCS (CRC) or classified as an alignment error.
Jabbers (Read-only)
This field displays the total number of frames that were greater than 1518
bytes and had a bad FCS (CRC).
Total Packets (Read-only)
This field displays the total number of frames (including bad frames,
broadcast frames, and multicast frames) received on this interface.
Total Octets (Read-only)
This field displays the total number of octets (bytes) of data, including
those in bad frames, received on this interface.
64 Octets (Read-only)
Displays the total number of frames including bad frames, received that
were 64 bytes in length (excluding framing bits, but including FCS bytes).
65 - 127 Octets (Read-only)
Displays the total number of frames, including bad frames, received that
were between 65 and 127 bytes in length (excluding framing bits, but
including FCS bytes).
128 - 255 Octets (Read-only)
Displays the total number of frames, including bad frames, received that
were between 128 and 255 bytes in length (excluding framing bits, but
including FCS bytes).
NOTE
It is normal for the Fragments field to increment. This is
because the RMON agent increments the field when
undersized frames are detected (which are normal
occurrences due to collisions) and when noise hits occur.