manualshive.com logo in svg

BVL V-COMFORT 2300, Operating Manual

Share
Download
BVL V-COMFORT 2300 Operating Manual Download Page 75

 

Operation 

Chapter 7 

Operating the machine 

Page 75 

 

Version: 3/25/20 

 

 

Translation of the original operating manual 116588 

Bernard van Lengerich 

 

 

 

7.5.8

Switching the machine off 

Requirements: 

 

The machine is switched on (see Chapter 7.5.1 "Switching the machine on"). 

 

The machine is unladen. 

 

Safety devices are in the safety position (e.g. covers fitted). 

 

The supply lines of the machine are connected to the front, farmyard or wheel loader 
(see Chapter 7.4.2 "Coupling the supply lines"). 

 

Work steps: 

1. 

Use the control unit on the front, farmyard or wheel loader to switch off the oil circuit 
between the front, farmyard or wheel loader and the machine. 

The hydraulic supply has been switched off. 

2. 

Turn the control dial on the control panel (see Chapter 7.2.1.2 "Adjust the speed of the 
dosing augers

") to the “OFF” position. 

3. 

Turn the rotary switch on the control panel (see Chapter 7.2.1.1 "Switch dosing augers 
and conveyor belt on/off

") to the “Stop” position. 

The machine is switched off. 

Summary of Contents for V-COMFORT 2300





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands