manualshive.com logo in svg

BVL V-COMFORT 2300, Operating Manual

Share
Download
BVL V-COMFORT 2300 Operating Manual Download Page 74

 

Operation 

Chapter 7 

Operating the machine 

Page 74 

 

Version: 3/25/20 

 

 

Translation of the original operating manual 116588 

Bernard van Lengerich 

 

 

 

7.5.7

Removing clogs 

 

WARNING 

Risks of personal injury from crushing, shearing, cutting, amputation, entrapment, 
winding up, entanglement, catching and impact may arise during clog removal! 

  Switch off powered work tools. 

  Hydraulic functions may be executed and work tools or parts of the machine may be 

actuated inadvertently when the engine of the front, farmyard or wheel loader is running. 
Switch off the engine of the front, farmyard or wheel loader. 

  Secure the engine of the front, farmyard or wheel loader against inadvertent start-up. 

  Secure the front, farmyard or wheel loader and the machine against rolling away 

inadvertently. 

  Secure the machine/raised moving parts of the machine from being lowered inadvertently. 

  Before removing clogs, secure the front, farmyard or wheel loader and the machine from 

starting up and rolling away inadvertently. 

  Wait until the machine has come to a complete standstill before entering the danger area 

of the machine. 

 

Requirements: 

 

The front, farmyard or wheel loader and the machine have been switched on (see 
Chapter 7.5.1 "Switching the machine on"). 

 

There is no one in the danger area. 

 

The hydraulic circuit of the front, farmyard or wheel loader has been activated. 

 

The door is clogged. 

 

Work steps: 

1. 

Switch off the front, farmyard or wheel loader. 

2. 

Secure the front, farmyard or wheel loader and the machine against inadvertent start-
up and rolling away (see Chapter 6.4 "Switching off the front, farmyard or wheel loader 
and securing it against inadvertent start-up and rolling away"). 

3. 

Use the actuator lever at the control unit on the front, farmyard or wheel loader to 
switch the hydraulic system off. 

4. 

Remove the clog until the door is clear again and the conveyor belt and the dosing 
augers can rotate freely again. 

The clog has been removed. 

5. 

Start the front, farmyard or wheel loader. 

6. 

Switch the hydraulic system on. 

The bedding material can be discharged again. 

 

Summary of Contents for V-COMFORT 2300





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands