Safety instructions
Chapter 2
Safety instructions on operation
Page 19
Version: 3/25/20
Translation of the original operating manual 116588
Bernard van Lengerich
DANGER
Mortal danger from electric voltage!
Before performing any work on the electrical system, disconnect the negative terminal of
the battery.
Use only the designated fuses. Using higher amperage fuses may destroy the electrical
system
– as there is a risk of fire.
Follow the correct order when connecting and disconnecting the battery:
Connect: connect the positive terminal first before connecting the negative terminal,
Disconnect: disconnect the negative terminal first before disconnecting the positive
terminal.
After subsequently installing electrical devices or components on the machine including
connection to the on-board supply system, the user must independently verify that the
installation does not affect any faults of the vehicle's electronic system or other
components.
Make sure that subsequently installed electrical or electronic components comply with the
current revision of the EMC Directive 2014/30/EU and bear the CE mark.
DANGER
Mortal danger from explosion hazard!
Avoid spark formation and open flames in the vicinity of the battery.
Always seal the positive terminal of the battery with the designated cover.
WARNING
Risk of injury from missing protective equipment!
Use the prescribed safety equipment.
Safety instructions on operation
2.5
DANGER
Risk to persons!
Make sure that no one is in the danger area before switching on the machine.
Use caution and pay attention throughout the work area of the machine.
Keep third parties away from the danger area of the machine before operating the
machine.
All personnel are required to stay out of:
the work/danger area of the machine.
the turning and slewing range of the moving parts on the machine.
the area below raised and unsecured moving parts of the machine.
Do not operate any parts of the machine that are actuated by non-muscular energy unless
no one is in the work/danger area.
Before exiting the front, farmyard or wheel loader, secure it against inadvertent start-up and
rolling away.
Safely support raised parts of the machine before anyone accesses the area underneath
the raised parts.
