Burster ForceMaster 9110, Operating Manual

Page: 54 / 95

54
of 95
Fi
tting
th
e loa
d
ce
ll t
o
the
m
anua
l pre
ss
100 C -> stick
If this menu item is enabled, the following 100
operations are stored on the stick as a curve file.
Recording will stop after these 100 operations.
This is intended for product start-up, in order to record
this critical phase graphically.
100 C ->
STOP
If this menu item is enabled, the recording of 100 curves
is interrupted.
This menu item inactivates the previous one.
All C -> stick
If this menu item is enabled, the following operations are
stored on the stick as a curve file.
This function is useful if graphical evaluations of critical
pressing operations on high-value parts are to be
carried out over a long period
Note that the ForceMaster 9110 is not able to measure
during the recording time. The graphic files also take up
a great deal of space on the stick.
All C ->
STOP
If this menu item is enabled, the recording of all the
curves is interrupted.
This menu item inactivates the previous one.
Retrieving information from the USB status
1
Open the "USB stick" menu.
2
Press the operating knob in order to select "USB status".
6
Turn the operating knob until the information you want appears.