Burster ForceMaster 9110, Operating Manual

Page: 47 / 95

47
of 95
M
easu
rem
en
t
In measuring mode, an error that occurs during the pressing operation is shown immediately as a
message on the display. You must acknowledge this error message (with or without MasterCard,
depending on the setting). After acknowledging the error the selected information window appears
again.
An attention signal sounds as soon as you produce a faulty part and (deliberately or accidentally)
do not acknowledge this procedure. Operating the press again immediately results in a further
error message.
In addition, the red lamp flashes in order to provide a further indication that a faulty part has been
produced. After acknowledging the error message, the red lamp continues to flash in order to
remind you that the last part that was produced was faulty.