Burster ForceMaster 9110, Operating Manual

Page: 77 / 95

77
of 95
C
onf
ig
uri
ng
the
Forc
eM
as
te
r 9
11
0
se
tti
ngs
Triggerkraft einstellen
1
Open the "Internal settings" menu.
2
Turn the operating knob until the "FS autoconfig" menu item appears.
3
Press the operating knob in order to select the menu item.
4
Press the operating knob in order to select the "Force level" menu item.
5
Turn the operating knob in order to set the value that you want.
6
Press the operating knob to confirm your setting..
Selecting the RS232 interface
1
Open the "Internal settings" menu.
2
Turn the operating knob until the "RS232 <-> USB" menu item appears.
3
Press the operating knob in order to select the "RS232" menu item.
Selecting the USB interface
1
Open the "Internal settings" menu.
2
Turn the operating knob until the "RS232 <-> USB" menu item appears.
3
Press the operating knob in order to select the menu item.
4
Turn the operating knob until the "USB" menu item appears.
5
Press the operating knob in order to select the menu item.
Switching the calibration message off
1
Open the "Internal settings" menu.
2
Turn the operating knob until the "Standard settings" menu item appears.
3
Turn the operating knob until the "CAL message" menu item appears.
4
Turn the operating knob until the "Yes" menu item appears.
5
Press the operating knob in order to select the menu item.
Switching the calibration message on
1
Open the "Internal settings" menu.
2
Turn the operating knob until the "Standard settings" menu item appears.
3
Turn the operating knob until the "CAL message" menu item appears.
4
Turn the operating knob until the "No" menu item appears.
5
Press the operating knob in order to select the menu item.