Burster ForceMaster 9110, Operating Manual

Page: 29 / 95

29
of 95
D
evi
ce
co
nc
ep
t
3.13 "PLC & IO" menu
This menu is only present on the ForceMaster 9110 with the step chain option. The step chain is a
very good way of automating small workstations economically.
See Section 3.17 Schrittkettensteuerung for more information.
You can make the following selections in the sub-menus:
Reset PLC
This sub-menu item resets the PLC.
See program
This sub-menu item allows you to see the PLC
program, but not to change it.
This lets you get a quick overview of the program.
By turning the knob, you can navigate through the
lines. Press the operating knob to return to the
main menu.
Edit program
Next STEP Select this sub-menu item in order to edit the next
program step.
Entry condition Select this sub-menu item in order to specify the
condition for the program step.
You will find a list of possible conditions in Section
6.3.1 Liste möglicher Bedingungen.
Entry command Select this sub-menu item in order to specify the
command in the program step.
You will find a list of possible commands in
Section 6.3.2 Liste möglicher Befehle.
Entry parameter Select this sub-menu item in order to specify the
parameter for the program step.
Entry END Select this sub-menu item in order to stop
processing the program step.
Previous STEP Select this sub-menu item in order to edit the
previous program step.
Delete program
Select this sub-menu item in order to delete the
program entirely.
Enable PLC
You can enable the PLC in this sub-menu. The
PLC executes the program.
Enable I/O
The standard error message signals are provided
at the outputs through this menu item.
Blog PLC + I/O
Activate this menu item in order to stop receiving
signals at the outputs.