Burster ForceMaster 9110, Operating Manual

Page: 78 / 95

78
of 95
"Orde
r da
ta
" m
enu
Changing the displacement unit
1
Open the "Internal settings" menu.
2
Turn the operating knob until the "Display format" menu item appears.
3
Press the operating knob in order to select the menu item.
4
Turn the operating knob until the "Displacement" menu item appears.
5
Press the operating knob in order to select the menu item.
6
Turn the operating knob until the unit you want appears.
9
Press the operating knob in order to select the menu item.
Changing the force unit
1
Open the "Internal settings" menu.
2
Turn the operating knob until the "Display format" menu item appears.
3
Press the operating knob in order to select the menu item.
4
Turn the operating knob until the "Force" menu item appears.
5
Press the operating knob in order to select the menu item.
6
Turn the operating knob until the unit you want appears.
7
Press the operating knob in order to select the menu item.
Training the UTK
1
Open the "Internal settings" menu.
2
Turn the operating knob until the "Train the UTK" menu item appears.
3
Press the operating knob in order to select the menu item.
4
Bring the press, with the UTK sensor fitted, to the bottom dead centre position.
5
Press the operating knob in order to conclude the procedure. The UTK sensor is now
tared to a value of 182°.