Burster ForceMaster 9110, Operating Manual

Page: 63 / 95

63
of 95
C
onf
ig
uri
ng
the
Forc
eM
as
te
r 9
11
0
se
tti
ngs
You can make the following selections in the sub-menus:
Programming
Next cam Select this sub-menu item in order to edit the next
cam.
Cam start Select this sub-menu item to set the beginning of
the cam.
Cam end Select this sub-menu item to set the end of the
cam.
Delete
Delete the complete setting with this sub-menu
item if you want to create an entirely new cam
program.
Programming cams
1
Open the "Cams" menu.
2
Press the operating knob in order to select the "Program" menu item.
3
Turn the operating knob until the "Cam start" menu item appears.
4
Press the operating knob in order to select the menu item.
5
Turn the operating knob in order to set the start value that you want.
6
Press the operating knob to confirm the value.
7
Press the operating knob in order to select the "End cam" menu item.
8
Turn the operating knob in order to set the end value that you want.
9
Press the operating knob to confirm the value.
10
Press the operating knob in order to select the "Next cam" menu item.
11
Repeat steps 3 to 10 until you have set all the cams that you want to.
Deleting cams
1
Open the "Cams" menu.
2
Turn the operating knob until the "Delete" menu item appears.
3
Press the operating knob in order to select the menu item.
4
Turn the operating knob until the "Yes" menu item appears.
5
Press the operating knob in order to select the menu item.