Bull NovaScale T840 E2 User Manual Download

Page: 57 / 210

User Guide

www.bull.com

Modifying the server from tower to rack-mount type

Remove the front bezel.

Remove the four stabilizers from the bottom of the server (4 screws).

Figure 14: Removing the stabilizers

Mount the stud to the front face of the server.

Using the screws securing the dummy cover mounted on the vacant slot of

5.25-inch device, put the device cover over the dummy cover, and secure it
together with the dummy cover.

Figure 15: Mounting the dummy cover

According to your system configuration, secure the 3.5-inch HDD cover to the

front cover with metric screw (M4).

■

3.5-inch fixed disk model

Summary of Contents for NovaScale T840 E2



















































































































































































































Search results

Summary of Contents for NovaScale T840 E2

Reviews:

Related manuals for NovaScale T840 E2

Brands by name

Popular brands

Bull NovaScale T840 E2, User Manual

Search results

Summary of Contents for NovaScale T840 E2

Reviews:

Related manuals for NovaScale T840 E2

Brands by name

Popular brands