Bull NovaScale T840 E2 User Manual Download

Page: 14 / 210

User Guide

www.bull.com

T840 E2 System Features

This system is a highly flexible and reliable server designed to offer the highest levels
of performance for the price range.

Its main features are:

■

The Intel® Tylersburg chipset.

■

The Intel® Xeon® Nehalem-EP and Westmere-DP processors.

■

The RAID technology, offering support for various RAID levels on Microsoft®
Windows® and Linux operating systems.

■

The tower chassis can easily be installed into a standard EIA 19-inch rack cabinet.

To get comfortable with your computer, we recommend you read this user guide. Keep
it in a safe place for future reference.

Summary of Contents for NovaScale T840 E2



















































































































































































































Search results

Summary of Contents for NovaScale T840 E2

Reviews:

Related manuals for NovaScale T840 E2

Brands by name

Popular brands

Bull NovaScale T840 E2, User Manual

Search results

Summary of Contents for NovaScale T840 E2

Reviews:

Related manuals for NovaScale T840 E2

Brands by name

Popular brands